What type of fluid does an Allison Transmission take?
TES 295® automatic transmission fluid
Allison recommends that customers use an Allison Approved TES 295® automatic transmission fluid to extend drain intervals and enhance transmission performance and durability in all operating environments with on-highway products.
How much fluid goes in an Allison transmission?
Allison 3000 transmissions can hold approximately 29 quarts of fluid; the larger Allison 4000 can hold approximately 48 quarts. But not all of this fluid is in the transmission pan. Much is contained in the transmission cooler, cooler lines, and torque converter.
What kind of oil does a transmission use?
Commonly recommended manual transmission fluid formulations include SAE 80W, 75W-90, 80W-90 and SAE 90. In some cases, a multi-grade engine oil or automatic transmission fluid may be recommended. However, a manual transmission fluid is typically the most optimal for manual transmissions.
How often should you change transmission fluid in an Allison transmission?
Allison says the fluid is good for 100,000 miles.
What is the output speed of a 3000 MH transmission?
OUTPUT SPEED SENSOR INPUT SPEED SENSOR ASSEMBLY PADS BREATHER Figure 2. Typical 3000 MH Series Transmission (Allison 4thGeneration Controls) 9 TURBINE SPEED SENSOR MOUNTING PAD INPUT SPEED SENSOR NAMEPLATE FILL TUBE AND DIPSTICK OUTPUT SPEED SENSOR FEEDTHROUGH HARNESS CONNECTOR
What are the ports on a 4000 MH transmission?
COOLER PORTS MAIN-PRESSURE TAP MOUNTING PAD (BOTH SIDES) COOLER PORTS BREATHER BREATHER FEEDTHROUGH HARNESS CONNECTOR Figure 4. Typical 4000 MH Series Transmission (Allison 4thGeneration Controls) 11 A BRIEF DESCRIPTION OF THE ALLISON MOTORHOME SERIES TRANSMISSIONS
What kind of transmission does a 3000 series motorhome have?
Typical 3000 MH Series Transmission (WTEC III Controls) 8 V06341.03.01 ASSEMBLY PADS (BOTH SIDES) BREATHER MAIN-PRESSURE TAP NOTE:Inch Series Threads TORQUE CONVERTER WITH LOCKUP CLUTCH AND TORSIONAL DAMPER FILL TUBE AND DIPSTICK (Available on both sides) FILL TUBE AND DIPSTICK (Available on both sides) MAIN-PRESSURE TAP
What are the ports on a 3000 MH motorhome?
COOLER PORTS MAIN-PRESSURE TAP MOUNTING PAD (BOTH SIDES) COOLER PORTS FEEDTHROUGH HARNESS CONNECTOR BREATHER BREATHER Figure 3. Typical 4000 MH Series Transmission (WTEC III Controls)
OUTPUT SPEED SENSOR INPUT SPEED SENSOR ASSEMBLY PADS BREATHER Figure 2. Typical 3000 MH Series Transmission (Allison 4thGeneration Controls) 9 TURBINE SPEED SENSOR MOUNTING PAD INPUT SPEED SENSOR NAMEPLATE FILL TUBE AND DIPSTICK OUTPUT SPEED SENSOR FEEDTHROUGH HARNESS CONNECTOR
COOLER PORTS MAIN-PRESSURE TAP MOUNTING PAD (BOTH SIDES) COOLER PORTS BREATHER BREATHER FEEDTHROUGH HARNESS CONNECTOR Figure 4. Typical 4000 MH Series Transmission (Allison 4thGeneration Controls) 11 A BRIEF DESCRIPTION OF THE ALLISON MOTORHOME SERIES TRANSMISSIONS
Typical 3000 MH Series Transmission (WTEC III Controls) 8 V06341.03.01 ASSEMBLY PADS (BOTH SIDES) BREATHER MAIN-PRESSURE TAP NOTE:Inch Series Threads TORQUE CONVERTER WITH LOCKUP CLUTCH AND TORSIONAL DAMPER FILL TUBE AND DIPSTICK (Available on both sides) FILL TUBE AND DIPSTICK (Available on both sides) MAIN-PRESSURE TAP
COOLER PORTS MAIN-PRESSURE TAP MOUNTING PAD (BOTH SIDES) COOLER PORTS FEEDTHROUGH HARNESS CONNECTOR BREATHER BREATHER Figure 3. Typical 4000 MH Series Transmission (WTEC III Controls)
