Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.

What is the most common wrench size?

Socket Wrench Most common are the 1/4-inch, 3/8-inch and ½-inch ratchet drivers, but ¾-inch and 1-inch sets are available for heavy-duty work.

How do wrench sizes work?

Spanner. The width across flats indicates the “size” of the spanner. It is imprinted on the spanners in millimeter (mm) values. … Sizes that may interchange, depending on the precision needed, includes 2 mm (close to 5⁄64 in (1.98 mm)), 4 mm (close to 5⁄32 in (3.97 mm)) and 8 mm (close to 5⁄16 in (7.94 mm)).

What size wrench fits a fitting?

#20 A/N Fitting Wrench.

How do I choose an adjustable wrench?

Capacity. Each adjustable wrench has a capacity (or range) of fastener sizes with which it can work. These sizes can run from minuscule to huge fasteners over one inch in size. Careful consideration of the fastener sizes most typical of your repair needs will help you choose the best adjustable wrench.

What sizes do sockets come in?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).

What is better 6 point or 12 point?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.

What size wrench fits a garden hose?

usually an 8″ wrench will work.

What type of sockets are most commonly used?

Hex sockets are the most common type of socket and come in two main types: hex/6 point sockets and bi-hex/12 point sockets.

What size hose is an10?

AN SizeHose i.d. – Tube o.d.SAE Thread Size-105/8 in.7/8 in.-14-123/4 in.1 1/16 in.-12-161 in.1 5/16 in.-12-201 1/4 in.1 5/8 in.-12

Article first time published on

What size wrench is 10AN?

Aluminum AN Hose End Wrench, 10AN (for 1 inch hex) – Pegasus Auto Racing Supplies.

How do I know what size nut to buy?

Place the end of a measuring tape on one of the flat sides of the nut’s outer perimeter. Stretch the tape measure across the nut’s diameter to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement.

How do I know what size bolt I need?

  1. Step 1: Measure the shank’s diameter. …
  2. Step 2: Determine the thread pitch. …
  3. Step 3: Measure the length of the shank. …
  4. Step 4: Determine the bolt’s grade. …
  5. Step 5: Determine the shape of the bolt’s head. …
  6. Step 6: Measure the length of the threaded portion of the bolt.

What size socket fits a M20 nut?

Bolt sizeSizeTolerance3/4″UNF1-1/8″29.1529mm29.58M2030mm30.581-3/16″30.74

What do I do if my wrench is too small?

  1. Duck tape. Duct tape is useful in almost any situation but you may be surprised to learn that you can use it to loosen bolts. …
  2. Two coins. Who would think that money can be used as a makeshift tool? …
  3. Zip-tie. …
  4. Another nut and bolt.

What is the standard size adjustable wrench?

Item #DescriptionSize20786088″ Adjustable Wrench8″/200mm207861010″ Adjustable Wrench10″/250mm207861212″ Adjustable Wrench12″/300mm207861515″ Adjustable Wrench15″/380mm

How are adjustable wrenches sized?

An adjustable wrench is larger than a fixed open-end or box-end wrench, but one adjustable alone can do the work of a number of fixed wrenches. The crescent has one jaw that is fixed and one that is adjusted by turning a worm screw. … Both larger and smaller models, as well as a number of sizes in between, are available.

Can I use a 12 point socket on a 6 point nut?

Compared with the 6-point socket, a 12-point socket has twice as many points, so it can more easily slide onto a hex nut. In other words, you would need to rotate only up to 30 degrees to fit a 12-point socket onto a hex nut. … Torque power load is borne by the flanks of the nut or bolt instead of by the corners.

What are 8 point sockets used for?

What is an 8 point socket used for? Our range of 8 point sockets are perfect for use on our range of Pyramid Head Door Screws, Lag Bolts and Square Headed Machine Bolts. 8 point sockets take away the need for the use of a shifter and will stop you rounding off the head of a square bolt.

What color are most impact sockets?

Impact sockets are typically black. This is because the surface is carbonized in order for it to harden. Ensuring that the surface is hard allows the sockets to absorb sudden torque changes i.e. “impact” a lot better.

How do I know what size socket wrench I have?

  1. The size of the drive socket (the part that attaches to the socket wrench). These are always given in imperial measurements, and will usually be either 1/4″, 3/8″, 1/2″, 3/4″ or 1″.
  2. The size of the socket head (the part that fits over or into a fastener).

What size is a 33mm socket in standard?

A 33mm metric socket is 1.29921 inches in size which most closely matches a 1 5/16 standard size socket.

How do you measure a socket wrench?

  1. Insert the shank of the bolt into the holes in a bolt-sizing gauge. …
  2. Locate the printed bolt size to the side of the correct hole on the gauge (for example, 1/2, 3/4 or in mm for metric bolts).
  3. Locate the socket head in the socket set that has this size printed on its side.

What order do standard sockets go in?

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

What sockets do mechanics use?

⅜” drive sockets are the most practical sockets for most automotive jobs. If you can only pick one drive socket set — you want a ⅜” drive set. However, these still won’t let you complete any job. ½” drive socket sets are the largest drive sockets that most mechanics need.

What is a good torque wrench?

  1. TEKTON 24335 Drive Click Torque Wrench – Best Overall. …
  2. Capri Tools 31000 Torque Wrench – Best Value. …
  3. Industrial Brand CDI 2503MFRPH Torque Wrench – Premium Choice. …
  4. ACDelco ARM601-4 Digital Torque Wrench. …
  5. Neiko Pro 03709B Drive Adjustable Torque Wrench. …
  6. EPAuto ST-010-1 Drive Click Torque Wrench.

What size is a standard outdoor faucet?

Hose bibs are outdoor faucets, usually mounted onto the side of your house. Most often they have a threaded outlet to which you can attach a garden hose or backflow device. The outlet will be one of two widths: 1/2 inch or 3/4 inch. These are two most common widths of water pipes as well.

What size is an4?

AN SizeMetal Tube O.D.Thread Size-3 AN3/16″3/8″ – 24 SAE-4 AN1/4″7/16″ – 20 SAE-5 AN5/16″1/2″ – 20 SAE-6 AN3/8″9/16″ – 18 SAE

What size is 4AN hose?

Male Thread SizeAN Size*Equivalent Tube Size (Nominal OD)3/8-243AN3/16″7/16-204AN1/4″9/16-186AN3/8″3/4-168AN1/2″

What size tube is 6AN?

Male Thread SizeAN Size*Equivalent Tube Size (Nominal OD)9/16-186AN3/8″3/4-168AN1/2″7/8-1410AN5/8″1 1/16-1212AN3/4″

What size wrench fits a 6an fitting?

Stainless Tubing AN Equivalent All dimensions are in inches unless otherwise noted.ANTube Size ODWrench Size-55/16″N/A-63/8″11/16″-81/2″7/8″