In general, fiber cement siding costs anywhere from $5.00- $13.50 per square foot installed.

How much does it cost to put fiber cement siding on a 1500 sq ft house?

Home Size (Square Footage)Average Cost Installed1,000$5,500 – $12,5001,500$8,500 – $18,5002,000$11,000 – $24,5002,500$13,500 – $30,500

How long does cement board siding last?

With the proper care, your James Hardie fiber cement siding will outlast its 30-year warranty. It can even last up to 50 years if cared for properly.

What are the disadvantages of fiber cement siding?

  • It is not available for direct order from the manufacturer. …
  • It comes with a higher labor cost than other materials. …
  • It requires you to re-paint the siding at some point during its lifetime. …
  • It is not a recyclable material.

How often does fiber cement siding need to be painted?

If you purchase prefinished fiber cement siding, you don’t need to worry about painting it when it’s time to install. Unfinished styles on the other hand should be painted shortly after installation. For both types, a new paint job can be done every 10 to 15 years.

How much does Hardie plank siding cost to install?

HardiePlank Lap Siding Cost HardiePlank lap siding costs $0.70 to $6 per square foot for materials. With labor, equipment and trim, you’ll pay $5 to $14 per square foot for installation.

Is fiber cement siding expensive?

Fiber cement siding costs $5 to $25 per square foot, including materials and labor. The materials alone cost between $1 and $15 per square foot, and labor ranging from $4 and $10 per square foot.

What is the best type of siding?

Siding TypeOptionsDurabilityVinylExcellent20-30 yearsAluminum & SteelGood30-50 yearsFiber Cement & CompositeGood35-50 yearsWoodExcellent50+

How much more expensive is James Hardie siding?

Board ExposureCost per 12′ BoardCost / Square (100 sq. ft.)7″ exposure$13.27$185.78 / square

Is Hardie board the same as fiber cement siding?

Fiber cement siding is often called “hardiplank” or even “hardie board” named from the most popular brand of fiber cement siding which is manufactured by James Hardie. … It is also installed in much the same way as traditional lapboard or wood siding, as it is nailed directly to your home.

Article first time published on

Does Hardie board soak up water?

Hardie siding does a great job of wicking moisture when it is installed on the wall, but when it’s uncovered and flat on the ground it will absorb water. … And if a board does get wet, but is not sitting in moisture for an extended period of time, you can simply let it dry out before installing.

What is the longest lasting house siding?

Vinyl Siding: 60+ years (warranties last between 20-40 years) Fiber Cement Siding: 50+ years. Stucco Siding: 50-80 years, depending on how it is backed. Metal Siding: Up to 40 years.

Is Hardie board more expensive than brick?

Material alone, regular Hardi siding runs approximately $1.15/SF where “Artisan” runs $2.40/SF and brick runs anywhere from $2.50-$5.00/SF depending upon the brick you choose.

Why does cement siding crack?

Hardie board siding usually cracks due to poor installation. The original installer might have accidentally installed a nail too close to the edge of the siding, causing a crack. You can easily fix it by cleaning it and then using caulk to patch the gap.

Can you pressure wash cement board siding?

Do not use a high-pressure hose to clean fiber cement siding. This is one of the few ways that you can damage it. If you feel that you need to use a pressure washer, especially on harder to reach locations, only use it at a low pressure — under 1500 psi — with a wide tip.

Do termites eat Hardie board?

Hardie Board siding resists pests including termites and carpenter ants. It’s also woodpecker resistant, so you don’t have to worry about the hassles of repairing termite or woodpecker damage.

Is fiber cement siding waterproof?

The HardiePlank siding is made with a human-made mix of strong materials and wood fiber for years of worry-free, maintenance-free service. Fiber cement siding is waterproof, fire-resistant, and insectproof.

Is Hardie board more expensive than vinyl siding?

Cost. There is no doubt about it, the advantages of hardie board come with a cost. Vinyl siding is far less expensive, both in terms of the product itself and labor costs to install it. Part of the savings stems from the fact that vinyl is much easier to cut, work with, and install.

How much does it cost to side a 2500 sq ft house?

Homeowners usually pay between $5,400 and $15,500 to side a house, or about $10,300 on average. *These prices are for a typical single-family home that ranges from 1,500 to 2,500 square feet.

Can hardiplank be installed over existing siding?

According to the best practices manual from James Hardie, existing siding can be used as a substrate as long as it is in good condition, meaning that it is not warped, bowed, curling, delaminated, or rotting. … If none of these potential problems are present, the existing siding is probably fine to use as the substrate.

How much does it cost to side a house with hardiplank?

Hardie board siding costs anywhere from $1 to $6 per square foot of material installed on a home. If you were to replace siding on an average size home of 1,500 square feet, you could expect to pay anywhere from $1,500 to $9,000 in total installation and replacement costs.

How often does James Hardie siding need to be painted?

Hardie Plank is also called fiber cement siding. While it’s far heavier than aluminum, vinyl or wood, it is extremely durable and typically only needs a new paint every ten to twenty years for maintenance.

Do you have to paint Hardie board?

Painting Hardie board siding will significantly improve its look and its longevity. Siding finishes generally last for around 15 years, so you need to do it, and do it right. Painting, when done properly can really bring out the wood feel of the Hardie board.

What is the most expensive siding?

When it comes to cost, stucco siding is among the most expensive siding options. Stucco costs between $6 and $9 per square foot.

What is the easiest siding to install?

How to Install Vinyl Siding. Compared to other sidings, vinyl is one of the easiest to install. It cuts easily, can be put up quickly, and requires no painting.

Why vinyl siding is bad?

Vinyl siding, especially dark siding, begins to fade in sunny climates. Painting is a poor option for reviving the color since the paint will likely peel and crack after a short time. Pressure washing can be disastrous if water enters your house through cracks and crevices around the siding.

What is better than hardiplank?

One of the biggest reasons many builders and homeowners choose LP over Hardie Plank siding is the significant cost difference. Across the US, Smartside is about 25-35% cheaper than Hardie. This difference amounts to thousands of dollars! LP is cheaper because both the materials and labor cost less than James Hardie.

How much does it cost to side a 3000 square foot house?

MaterialSteel1,500 SF (1,239 SF of Siding)$5,250 – $14,2502,000 SF (1,431 SF of Siding)$7,000 – $19,0003,000 SF (1,753 SF of Siding)$10,500 – $28,500

Does Hardie board need waterproofing?

Hardiebacker (James Hardie): the use of a waterproof membrane, vapor barrier or vapor. retarding membrane is optional unless the local building code requires it.

Should HardiPlank be primed?

Using The Proper Materials and Paint- For fiber cement or HardiPlank siding, a very good latex primer should be used to prepare the surface for paint. … For exposed composite siding, it is important to use a primer that matches the correct PH level.

Does Hardie board warp?

James Hardie® siding, unlike wood or vinyl siding, will not rot, warp, or burn. HardiePlank® is a fiber cement based siding, so it’s impervious to water, termites, woodpeckers, and any other animal you can think of.