What happens if the pilot light goes out?
Can a Pilot Light Outage Be Dangerous? The worry here is that when a pilot goes out, the gas valve that supplies the fuel for the pilot flame could still be pumping gas. This can mean a buildup of gas, and when the pilot is relit or relights itself it could result in a very serious explosion.
What to do if pilot light on water heater is not working?
If it’s bent and isn’t near the burner, you can simply shut off the gas, move it over and try lighting the pilot again. If that doesn’t work, clean it: shut off both the water heater gas valve and the main gas line near the heater. Unscrew the three nuts that hold the thermocouple and the two gas tubes to the valve.
How to light the pilot light on Richmond water heaters?
Bleed the lines according to the instructions provided with your model Richmond water heater and try to light the pilot light again. If your water heater does not light after 4 trys, or if on a gas water heater, you smell gas when the feed line is turned off, do not attempt to light the pilot. Call a water heater technician immediately.
What’s the best way to light a water heater?
While still holding the gas down, light that pilot. Some water heaters have a red or black igniting button, and others need to be lit manually with a long lighter. When the flame ignites, continue to hold the gas knob or button down for a full minute. Then release it slowly, and make sure the light is still lit.
Why does my pilot light keep going out?
If your pilot doesn’t re-light, won’t stay lit or keeps going out after a short time, you most likely have an issue with the hot water heater thermocouple. This can happen with age. This can happen with age.
How do I check the pilot light on my water heater?
Open the door/cover over the pilot light access. This will be located under the gas valve; some water heaters just have an open gap instead where you can see the pilot light burner. Use a flashlight or a headlamp to find the burner inside. Two small gas tubes will lead to it.
How do you light the pilot light on a heater?
Here is how to light the pilot light on a gas heater. Lighting the pilot light on a gas heater is simple to do. Turn the thermostat to its lowest setting. Turn the gas knob to the OFF setting and wait 5 minutes to clear out any gas.
How does a pilot light go out on a water heater?
Some of the most common reasons that water heater pilot lights go out include: A faulty thermocouple. Your thermocouple is responsible for sensing when your pilot light is lit. If it senses that the pilot light has gone out, the thermocouple shuts off the gas supply to the flame in order…
Why is the water heater pilot light keeps going out?
There are several things that can cause your gas water heater pilot light to keep going out. One of the most common is your thermocouple. If you are unfamiliar with what this device does, the thermocouple is a device in your hot water heater that uses an electrical current to determine whether the pilot light is on or not.
