The “T” intersection is a point at which three roads converge. The sign that represents it is usually a yellow diamond with a black “T” in the middle, and the main purpose of it is to warn drivers on the road segment that is about to end. … The “T” sign is in a special category of “special road hazard” signs.

What does the T warning sign mean?

T Intersection Traffic Sign One of the intersection traffic signs. The road you are traveling on ends straight ahead. Slow down and prepare to stop before turning. Most T-intersections will feature a YIELD sign or a STOP sign to remind you to give the right-of-way to cross traffic.

How do T-intersections work?

At an uncontrolled T intersection, the driver on the street which ends must yield the right-of-way to vehicles and pedestrians on the cross street. Some T-intersections have additional YIELD or STOP signs installed to remind drivers that they have to give way to cross traffic.

What is the sign for T intersection ahead?

T-intersection ahead. If you are on the terminating road, you must give way to all vehicles approaching from your right or left. This sign is for a crossroads ahead and you may need to give way at the crossroads, depending on the signage.

What does a blue sign mean?

Blue: This color is also used for guide signs. These signs tell you about services along the roadway such as rest areas, hospitals, gas stations, and lodging. … This color is used to alert you to possible dangers ahead due to construction and maintenance projects.

Are there 4 way stops in Australia?

The four-way stop sign intersections might not be common in Australia, but they are regularly used in the US and Canada. Better known as all-way stops, drivers in the US and Canada pass through the intersection depending on the order in which they arrived.

What's a junction sign?

These are T-junction signs: They mean that “another road is about to enter the road you are traveling on, so watch out for traffic from that new road.” IMPORTANT: Traffic coming along the “top” of the “T” has the right of way!

What does this sign mean dip?

The dip sign is a warning sign. Dip signs indicate that there is a dip or low place in the road. Drivers are suggested to slow down when they see a dip sign. It’s hazardous to encounter this sharp depression in the road while driving at a high speed.

What does a black circle road sign mean?

Ever seen those black ‘shapes’ on yellow backgrounds looking rather out of place on regular road signs? See if you can spot one on the sign above. Despite a popular myth that they’re a secret code directing government bigwigs to the nearest nuclear fall-out shelter, they are, in fact, emergency diversion route symbols.

Who gives way at T-intersection?

If you’re driving on a road that ends at a T-intersection, you must give way to all vehicles—except those doing a U-turn—travelling on the road continuing through the intersection. In this example, Vehicle A (white) must give way to Vehicle B (yellow).

Article first time published on

Who has right-of-way at T-junction?

A T-junction is where a minor road joins a major road. As a rule, the road going straight ahead, along the top of the ‘T’, has priority. The minor road with either have a: Stop sign and road markings.

Do you have to stop at T junctions?

What do I do at a stop sign? Some T junctions have stop signs at the end of them. It is mandatory to stop at these junctions. Once you have fully come to a stop, however, you will just need to follow the same tips as before.

What does a Brown sign mean?

Brown signs are most commonly used to convey tourist information, and the white lettering, which is displayed on the brown background, is internationally recognized as a sign providing information for tourists.

What is a hump bridge sign?

The hump bridge sign means there is an incoming hump bridge that is so severe that without warning, a driver may lose control. … If there is a risk of long vehicles grounding on the bridge, warning sign 782- “Risk of Grounding” should be mounted below. This sign may also be used with: Diagram 511- “Reduce Speed Now”

What does a black and yellow sign mean?

When you see this black and yellow sign, it means: Explanation Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign tells drivers to slow down and prepare for an abrupt change in direction at an extreme angle.

When should you drive at night?

When driving at night, you should: A Adjust your speed to keep your stopping distance within your sight distance. “At night your headlights will usually be the main source of light for you to see by and for others to see you. You can’t see nearly as much with your headlights as you see in the daytime.

Does the driver of the blue car give way?

“When you’re turning, you must give way to vehicles going straight,” a spokeswoman said. “However, while the driver of the blue car would expect to have right of way, they should be prepared to stop if the red car doesn’t see them or does not give way.”

Should you turn on your headlights when it's raining?

Front and rear fog lights must only be used in fog or rain, or when conditions such as smoke and dust limit your vision. … If your vehicle is not fitted with fog lights, use your headlights during the day in these adverse conditions.

Why do you stop if there is water on the road?

If you drive too quickly through a puddle you risk the car aquaplaning or sliding and becoming uncontrollable. If water over the road could be too deep for your vehicle, stop and check the depth before driving any further.

What are red circle signs?

A sign with a red circle means that you aren’t allowed to do something. Study Know Your Traffic Signs to ensure that you understand what the different traffic signs mean.

What does Blue circle sign mean?

What do blue road signs mean? … Blue circle road signs give a positive (compulsory) instruction to a driver such as turn left or mini roundabout.

What does a red circle mean road sign?

Most regulatory signs are circular. A RED RING or RED CIRCLE indicates a prohibition. A BLUE CIRCLE generally gives a positive (mandatory) instruction or indicates a route for use only by particular classes of vehicle (see sections on tram signs and bus and cycle signs).

What does a broken yellow line mean?

Broken yellow lines indicate that you may pass if the broken line is next to your driving lane. Two solid yellow lines indicate no passing.

What does loose gravel sign mean?

This is a temporary warning sign usually erected by road workers to indicate there’s gravel on the road. It’s a warning that the road might be slippery on corners, especially for motorcyclists, and also there’s the danger of throwing loose stone chippings up which can chip or break another vehicle’s window.

What do soft shoulder mean?

On a busy road, the soft shoulder is an unpaved area at the side of the road where vehicles are allowed to stop in an emergency.

Can you drive after taking prescription medication?

Do not take more than the prescribed dose of the medicine. Do not drink alcohol or take other drugs while you are taking medicines. Do not drive if you have missed a dose of medicine that you need to control symptoms that could affect your driving. Arrange another form of transport, such as public transport or a taxi.

Can you turn left on a red light in NSW?

Turning left on a red light When you see this sign at traffic lights, you must stop at the red light, and then turn left when it’s clear. When turning, you must give way to traffic approaching from the right.

Can you pass a car turning left?

You may pass on the right only when: An open highway is clearly marked for two or more lanes of travel in your direction. The driver ahead of you is turning left and you do not drive off the roadway to pass. Never pass on the left if the driver is signaling a left turn.

How long can you stop in a yellow box?

These have criss-cross yellow lines painted on the road (download ‘Road markings’). You MUST NOT enter the box until your exit road or lane is clear. However, you may enter the box and wait when you want to turn right, and are only stopped from doing so by oncoming traffic, or by other vehicles waiting to turn right.

How far are you allowed to reverse?

Explanation: You mustn’t reverse further than is necessary. You may decide to turn your vehicle around by reversing into an opening or side road. When you reverse, always look all around you and watch for pedestrians.

How do you become a junction?

  1. Mirrors: check your main and left mirrors.
  2. Signal: signal your intention.
  3. Manoeuvre: Position: position your car to the left of the lane. Speed: slow down (and select the right gear) Look: check the road you’ll be turning into both ways.