T1-11 siding is a functional siding with great aesthetics so what is the issue with this siding. … OSB T1-11 siding has more issues with water because of how it is manufactured. It is made with wood strands and flakes and is treated with a resin to bind it together when pressure is applied in the process.

Is all T1-11 pressure treated?

T1-11 siding features narrow, evenly spaced grooves on a rough-finished board for a pastoral appearance. Pressure treated for above ground applications, T1-11 siding features grooves spaced either 4″ or 8″ on-center to provide options for achieving the look you desire for your home, shed or pump house.

Is T1-11 siding waterproof?

T1-11 siding is not waterproof because it is not treated with any resins and chemicals that repel moisture. T1-11 siding needs to be protected against the weather with primer, paint, or stain. You also need to caulk around doors, windows, joints, and nails to keep the water out.

Does T1-11 need to be treated?

T1-11 siding is not treated and is vulnerable to moisture damage. It comes in two types: plywood and OSB (oriented strand board).

Is T1-11 plywood treated?

On-Center Pressure-Treated Plywood.

What is T1-11 treated with?

OSB T1-11 siding has more issues with water because of how it is manufactured. It is made with wood strands and flakes and is treated with a resin to bind it together when pressure is applied in the process.

Can T1-11 be hung horizontally?

1 Answer. If you carefully read the instructions, you will not find any instructions that say it cannot be installed with the grooves horizontal. Rather, they only show it installed vertically.

Does T1-11 siding need Tyvek?

Do I Need Tyvek Under T1-11 Siding? T1-11 is both a siding and a sheathing and can be fastened directly to the exterior face of the studs. House wrap like Tyvek or tar paper provides a wind and moisture barrier which can be beneficial depending on the purpose of the structure it is used on.

Should you paint or stain T1-11 siding?

T1-11 siding is wood or wood-based siding for your home. You should paint T1-11 siding with a high-quality acrylic exterior paint.

How do you seal the bottom of T1-11 siding?

Trim the siding with one-by-four-inch wooden trim, covering the gaps around windows and doors, under the soffit and on the corners of the house. Nail the trim with two-inch galvanized nails, then caulk around it with acrylic latex caulk.

Article first time published on

Should you seal the bottom of siding?

DO NOT seal the bottom with any sort of impermeable caulking nor spray foam. The bottom should remain permeable so that if water gets behind your siding for whatever reason then it has an escape path.

Why is it called T1-11?

Plywood and other compressed wood siding products are an inexpensive way to sheath outdoor buildings, sheds and other projects. T1-11, sometimes noted as T111 or T1, is an example of one of many such wood siding products. The ‘T’ in T1 stands for “textured,” which references the grooves or channels cut into the siding.

Is T1-11 siding fire resistant?

The all-wood nature of T1-11 siding can likewise present an issue for property owners looking for optimum safety and fire-resistant construction, as the flammability of T1-11 ranks much greater than other less-flammable siding alternatives, like steel or stucco.

Can treated plywood be used for exterior siding?

Treated Plywood Plywood made with exterior grade glue is another type of outdoors plywood suitable for installation under siding. This is simply referred to as exterior grade plywood.

How can I make my T1 11 siding look better?

Trim It. T1-11 sheets come with solid or grooved faces, and many installers under-trim it, leaving joints between boards uncovered and visible. Covering these joints, especially horizontal ones between stories, with 1-by-4-inch trim improves the appearance of the siding by making it look more finished.

What is reverse board and batten?

Reverse Board & Batten siding features an extra thick panel that is reinforced with a foam backer to create the rigidity and durability of hardboard cladding. It is lighter, easier to handle, and more weather-resistant than real wood, fiber cement, and wood composite siding.

How do you do T1-11 nails?

Secure the T1-11 to one of the wall studs next to the center stud with 8d nails placed every 8 inches, using the chalk line as a nail placement guide. Drive the first nail into the center of the siding and work toward the top and bottom edges. Place the last nail on each stud within 1 inch of the siding’s edge.

How do you trim a T1-11?

Trim T1-11 with 1- by 3- or 4-inch lumber. Nail the trim to the corners of the house and around windows and doors with 8d galvanized finish nails. It is also common practice to trim the tops to the sheets, where the wall meets the soffit, and the bottoms, where it meets the foundation.

Can SmartSide panels be installed horizontally?

LP SmartSide siding is designed for horizontal installation only. Un- grooved LP SmartSide Precision series panel siding is available for board and batten applications. Refer to the installation instructions for proper installation.

Is T1-11 the same as OSB?

T1-11 siding comes in two major grades: plywood and OSB, which stands for ‘Oriented Strand Board. … However, the plywood version of T1-11 is far superior overall to the OSB version because of its greater durability and the variety of finishing options it offers. Plywood T1-11 is also known simply as plywood siding.

Can you make T1-11 look like board and batten?

T1-11 is often available with either a rough or smooth finish, which is important to consider when stocking up on project materials. In addition, this type of plywood is cut into practical panels, often with stylish exterior grooves that make board-and-batten and shiplap construction easy.

Can you stain Duratemp siding?

Duratemp ® T-111 holds paint extremely well. You can paint or stain this siding, we suggest paint over stain because the stain will not hold up as well.

How much is a sheet of T1-11?

T1-11 Plywood Costs Depending on the finish and size, this siding costs between $25 and $40 per 4 foot by 8 foot sheet. Add installation costs and construction materials, and you end up with a range between $3.50 and $7.20 per square foot. Plywood consists of multiple layers of thin wood veneer.

What is board batten siding?

Traditionally, board and batten siding starts with wide vertical planks (boards), which are then joined together by thin vertical strips (battens) to cover the seams. Homesteaders and farmers would use sawmills to cut the long boards, and the battens were put in place to make the structure as airtight as possible.

Can you put Hardie board over T1-11?

Tom: Yes. It’s a perfect application for it because T-111 is nothing more than a textured plywood, and a plywood makes a great sheathing. Get rid of the rot. Get some regular CDX plywood, the same thickness as your T-111, fill in the gaps, put the Tyvek on there, put the Hardie on there.

Should I caulk Masonite siding?

Caulking Masonite™ siding should be done 24-48 hours after any cleaning has taken place. … Best to caulk ends of siding where they meet trim boards. Using a high quality white latex painter’s caulk.

How do you waterproof under siding?

Before the vinyl siding is installed on the house, a waterproof underlayment called house wrap must be placed on the OSB to prevent water from seeping through the siding and reaching the OSB, where it can damage the wood.

Can mice get in under siding?

Mice can climb under the siding and enter the home through an existing construction gap. Grass and mulch along the foundation provides habitat for mice.

What is better than t111?

It can stand up to harsh weather in any climate and resists damage from termites and fungal decay. How to Decide: If you want the most durable siding available, then LP wood siding is your better choice. If you want to sacrifice some durability for savings, then choose the plywood grade over the OSB T1-11.

What is another name for T1 11 siding?

Plywood T1-11, also known simply as plywood siding, can be stained if you’re looking for a natural wood look, or it can be primed and painted as well. On top of that, plywood siding can also be purchased in sanded or rough hewn varieties, although choosing between these two surfaces is purely an aesthetic choice.

Can you use plywood as siding?

Relatively inexpensive, plywood is a favored budget siding choice. … Home-grade exterior plywood siding has a rough sawn, textured appearance, and its edges are ship-lapped to allow for a tight fit.