How much does it cost to install a mantel

Fireplace Mantel CostsZip CodeBasicBestFireplace Mantel – Installation Cost$150.25 – $175.35$250.00 – $390.00Fireplace Mantel – Total$435.25 – $525.35$1200.00 – $1490.00Fireplace Mantel – Total Average Cost per Lineal Foot$480.30$1345.00

How much does it cost to have a mantle installed?

How do you attach a mantel to an existing fireplace?

Locate the studs behind the brick, stone, or faux veneer.
Drive 1/2in lag screws through each of the studs. …
Have a helper support the mantel while you mark the location of the support rods on the back of the beam. …
Apply construction adhesive into the holes. …
Slide into place, admire, and enjoy!

How much does it cost to build a wood mantel?

You’ll get the most design flexibility in a wood mantel that’s built to your specs—a job that costs anywhere from $2,000 to $5,000. There are specialty shops that do the work, or, if you’re undertaking a large renovation, your carpenter might be able to do the job.

How much does it cost to install a gas fireplace and mantel?

How Much Does Gas Fireplace Installation Cost? The average cost to install a gas fireplace is about $4,500 with average prices ranging from $2,500 to $10,000 in the US for 2020 according to Thumbtack.

How much does it cost to remove fireplace mantel?

Average Cost$6,000High Cost$10,000Low Cost$4,000

How much does it cost to add a hearth to a fireplace?

Fireplace TypeCost To InstallElectric Fireplace$100 – $2,200Wood-Burning Fireplace$1,900 – $3,300Gas Fireplace$2,300 – $4,000Masonry Fireplace$3,500 – $5,600

Can you install a mantel on tile?

If you plan on installing a mantel to help complete your fireplace surround, you will need to do so over the tile facing. Because tile is a hard, durable covering, take additional steps to ensure the mantel is properly secured and mounted into place.

How is a mantle attached?

As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. … In this case any screws or nails may be located on top or beneath the mantel.

How much does it cost to add a gas fireplace to an existing fireplace?

Since an insert is placed directly into a fireplace that is already installed in your home and uses the same chimney, the cost of installing a gas fireplace insert is comparably low. Purchasing a gas fireplace insert should cost you around $1,200. Having the unit installed can cost you around $500-$3,500.

Article first time published on

Does a fireplace add value to a home?

Aside from the obvious benefits and drawbacks, wood or gas fireplaces add 50% to 75% of an increase in home value while an electric fireplace adds minimal value.

What is the average cost of a gas fireplace insert?

A gas fireplace inserts costs about $2,000. The price of installation runs from $2,300 to $10,000, depending on factors like personal style, extra gas plumbing and necessary duct work. Need a fireplace taken out? The cost to remove a fireplace or chimney ranges from $4,000 to $10,000.

How much does it cost to have an electric fireplace installed?

Average Cost to Install an Electric FireplaceNational average cost$2,500Average range$1,000-$4,000Minimum cost$550Maximum cost$8,000

How much does it cost to put stacked stone on a fireplace?

Stacked Stone Fireplace Cost A 100-square foot stack stone fireplace runs between $1,420 and $2,020. Stacked stone is a type of style where pieces of stone or stone veneer are stacked on top of each other.

How much does it cost to brick fireplace?

Brick Fireplace Average Costs The average fireplace installation cost is $2,500 to $5,000, although an authentic brick fireplace constructed by a mason could cost up to $10,000 or more. Installing a prefabricated brick fireplace costs $2,000 to $3,000. A mason-built brick fireplace costs $3,500 to $5,000.

Will removing fireplace decrease home value?

But losing a fireplace can affect a home’s appeal and possibly even its resale value, real estate pros say. A fireplace can particularly be viewed as a valuable amenity in colder climates, and removing one could even reduce the number of buyers drawn to a property, some agents say.

Can I drywall over a fireplace?

A brick fireplace gives your home a nostalgic feel, especially around the holidays when stockings are hung with care. … To remodel your brick fireplace you can simply cover it with drywall. The end result is a smooth wall that you can paint and decorate anyway you like.

Can you knock down a wall with a fireplace?

Chimney breast walls, although sometimes there for cosmetics—are often constructed for structural support. If you want to rip out the wall, you’ll need a professional to give it a once-over, so you won’t cause irreparable damage to the rest of your home.

What type of wood is used for mantels?

Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.

How wide should a fireplace mantel be?

The recommended width for a mantel is 6 inches (15.24cm) wider on both sides. So, if your fireplace is 36 inches (91.44cm), your mantle should be at least 48 inches (121.92cm) wide.

Can you have a mantel without a fireplace?

So you love the look of a mantelpiece… and you don’t have a fireplace. Not to worry! … A mantel shelf can be installed on any wall and gives the look of a mantelpiece to frame and define the area. No chimney sweeping required!

Do you install mantel before or after stone?

If you’d like to have a mantel, it is ideally installed in conjunction with the stone veneer so this decision should be made along with the selection of your stone. There are several different materials that can be used to create a mantel, such as stone, painted wood, or natural or stained wood.

How deep is a typical mantel?

A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth. First, use a measuring tape and pencil to measure and mark the mantel top to size.

How deep should a fireplace be?

The standard size of a fireplace is anywhere from 2 – 3 feet wide, 24 – 29 inches high, and always about 16 inches deep. Of course, the opening could vary depending on your style and design ideas, as well as where you are locating the fireplace.

How deep is a mantle?

The mantle is the mostly-solid bulk of Earth’s interior. The mantle lies between Earth’s dense, super-heated core and its thin outer layer, the crust. The mantle is about 2,900 kilometers (1,802 miles) thick, and makes up a whopping 84% of Earth’s total volume.

Can you use a floating shelf as a mantel?

For those of you that haven’t opened up your Kreg Jig yes, this is a GREAT beginner project! The shelf is 60″ long making it a perfect mantle as well! I also think floating shelves are perfect for renters. Really you only leave a few screw holes in the wall that are very easy to fill and paint back over.

How is a mantle attached to a brick fireplace?

Attaching a mantel to brick is achieved through masonry rods and construction adhesives. You will want to ensure proper height for placing a mantel over your fireplace/ A moderate amount of adhesive is squeezed into each of the holes and a half-inch rebar support rod tapped in using a two-pound hammer.

How do you install shiplap over a fireplace?

Install Shiplap Place the first shiplap board on top of the mantle. Make sure it is level and centered. Follow your pencil mark and use a nail gun to nail the shiplap plank to the wall directly into the stud. Use an extension ladder to work your way from the bottom all the way to the top until you reach the ceiling.

How do you attach wood to a tile fireplace?

Clean the surface of your tile hearth to remove any dirt and debris. …
Measure and cut your wood trim to fit the areas you want to cover on the hearth. …
Apply a bead of project adhesive designed to adhere wood to ceramic tile along the back of a piece of wood trim.

How do you tile a fireplace insert?

Step 1: Prep the materials and layout.
Step 2: Mix the mortar.
Step 3: Spread and comb the mortar.
Step 4: Lay the hearth tile.
Step 5: Cut the tiles.
Step 6: Lay the first surround tile sheets.
Step 7: Cut the hearth tiles.
Step 8: Grout the tile.