Apply COLOR TOUCH mix to pre-shampooed, towel-dried hair – evenly from roots to ends. DEVELOPMENT TIMES: Without heat – 20 minutes (or 15 minutes after a perm or straightening service). With added heat (e.g. Climazon) – 15 minutes (or 10 minutes after a perm or straightening service).

How long do I leave Wella color touch on?

We recommend Wella Professionals Post Color Treatment. 5–20 min depending on intensity. Apply to pre-shampooed, towel-dried hair evenly from roots to ends.

Do you shampoo after color touch?

It’s best to shampoo 12 – 24 hours before coloring when using semi-permanent or demi-permanent hair color. Shampoo 24 hours before using permanent color. As soon as you’ve finished applying your hair color, set your timer for the amount of time indicated on the box.

How long does Wella color take to process?

Once the color is completely applied to hair, wait 20 minutes. For resistant gray hair, you may need to leave color on for an additional 5 minutes, for no longer than a total of 30 minutes.

Do you apply Wella color Touch to wet or dry hair?

Mix 1 : 1 with COLOR TOUCH Emulsion 1.9 % or 4 %, apply on dry hair, develop for 5–20 mins depending on desired intensity. When developing time is completed, add some lukewarm water and gently emulsify. Rinse thoroughly with water.

Can I use any developer with Wella Color Touch?

You can use any developer as long as it is 20 volume, But it is always best to use developer designed to work with the product.. For permanent hair color.

How much developer do I use with Wella Color Touch?

Mix 1 part Color Touch Crème Haircolor to 2 parts Color Touch Emulsion 1.9%. Mix Well. Color Touch developer emulsion 1,9% should be used with Wella Color Touch colors.

Can I use Wella permanent color on wet hair?

Do I apply the Wella Colour Charm Toner on damp or dry hair? Apply the Wella Colour Charm damp hair. This will ensure an even result as the toner won’t grab to sections of the hair.

Can you put Wella color on wet hair?

Yes, as a matter of fact, you can dye your hair while it’s wet. There are plenty of instances, even in the salon, when wet hair application is completely normalized, but often overlooked. … The only detail that dictates if we need apply to wet or dry hair is the type of color formulas we’re using.

How long does Wella Koleston process?

Leave for 50-60 minutes (without heat) or 25-35 minutes (with added heat). After processing time, wash your hair thoroughly with warm water. Apply the coloring mixture to lengths and ends only.

Article first time published on

What is Wella Color Touch used for?

Color Touch is a low commitment, ammonia free*, multi-dimensional demi-permanent hair colour for clients who like to change their tone more often.

Is color touch permanent?

Color Touch is a low commitment, ammonia free*, multi-dimensional demi-permanent hair color for clients who like to change their tone more often.

Is Wella Color Touch a toner?

Wella color touch (in any shade) is amazing. Its like a conditioning treatment and toner all in one! … I use color touch on all of my clients and even my hair. I love that it is true to tone and that it lasts long!

Can I leave toner on for an hour?

Use an applicator brush to work the mixture into your hair, focusing on the areas with unwanted undertones. Leave the toner in for up to 45 minutes, then rinse, wash with a moisturizing shampoo and deep condition.

Does Wella Colour touch cover GREY?

Choosing a Grey Coverage Product Try: Demi-permanent Color Touch, which is an ammonia-free hair colour that creates a radiant finish, or opt for Color Touch Plus to achieve up to 70% grey coverage. You can also try semi-permanent Color Fresh for up to 30% coverage.

Does Wella Colour touch contain peroxide?

The Colour Touch Plus Emulsion by Wella contains 4 % peroxide and has been especially developed to further intensify the TriSpectra colour.

What developer do you use with Wella Color Touch Plus?

Always mix Color Touch Plus with Color Touch Plus Creme lotion 4%. Mix in bowl or in applicator bottle.

Can I use pastel developer with color touch?

Always mix with COLOR TOUCH Emulsion 1.9 % for levels 8/ and below or Koleston Perfect Pastel Developer for pastel toning at levels 9/ and 10/. Mixing ratio: 1:2. · Development time: 5–15 minutes. TIP COMB EVENLY THROUGH THE HAIR IN ORDER TO ACHIEVE AN EVEN RESULT.

What volume is 1.9 Developer?

Color Touch Developer is a 1.9%, 6 vol cream lotion from Wella Professionals, specially formulated for use with the popular Color Touch and Color Touch Relights systems. It gives beautiful, long-lasting colour results.

Do you have to mix Wella toner with developer?

A developer is needed when toning with the Wella toners, usually a 20 vol. You can look into other toners that are compatible to be used with a 10 vol, which are deposit only, if you aren’t concerned with lightening your hair further.

What does 5 vol developer do?

Its role is as an activator for the color and will typically be in developers specifically made for glazes and toners. When used with bleach, 5 volume can create a very slight shift in the hair, which is great for fragile baby hairs needing only1-2 levels of lift.

What volume is 1.9 peroxide?

Wella Professionals Color Touch Developer 1.9% 6 Vol 500ml.

Do you dye your roots first or last?

Gutkin says to begin applying dye at the roots first, “since the roots need the most color and processing time,” and Rez advises really saturating them with color. “Then, apply dye from the back to the front to ensure the dye is sitting on the back of your hair the longest,” Gutkin says.

How long should you wait to shower after dying your hair?

Shampooing the day after you dye your hair. “After having your hair colored, wait a full 72 hours before shampooing,” says Eva Scrivo, a hairstylist in New York City. “It takes up to three days for the cuticle layer to fully close, which traps the color molecule, allowing for longer lasting hair color.”

How long should you leave hair dye in?

You should leave hair dye in for 30-45 minutes. Follow the instructions on the box. After 30 minutes, the ammonia and peroxide from hair dye go deeper into the hair structure and change its pigment. The procedure lasts from 30 minutes to three hours, depending on the hair length, dyes type, and color.

Should I shampoo before toner?

You can shampoo the hair first. Be sure to towel dry hair to remove excess water, then apply the toner. The only time I would condition the ends before a toner would be if the ends were super dry and porous. Porous hair soaks up the toner a little too much to the point where the hair could be unevenly toned in places.

Can toner damage your hair?

IS TONER BAD FOR YOUR HAIR? No! Toner is meant to help your hair and simply helps to neutralize its tone. That being said, as with any coloring process, over-using toner on your hair can cause strain on your strands.

What is the processing time for color touch red shades Relights?

Level up your red formulations. I strongly encourage you to rinse it again, towel dry it and apply relights /34 1:2 ratio with 1.9% or 4% developer for 15-20 mins. Your reds will look alive and show stoping!

What happens if you put too much developer in hair dye?

What Happens If I Put Too Much Developer In The Dye? Your mix will be more wet, & more runny. If it is way too runny, you may end up lightening the hair, but not depositing enough color. It will end up thinner, flatter and last less long.

What percentage of gray hair coverage does color touch give?

Demi-Permanent or Semi-Permanent Color Try: Demi-permanent Color Touch, which is an ammonia-free hair color that creates a radiant finish, or opt for Color Touch Plus to achieve up to 70% gray coverage.

What do you mix with colour touch?

Mixing Recommendation: Always mix COLOR TOUCH with COLOR TOUCH Emulsion 1.9% or 4%. Mix at a ratio of 1:2, e.g. 30g Cream + 60g Emulsion. First Time/Full Head Application: Wear suitable gloves.