To determine refrigerator depth, measure from the wall to the edge of your countertop. These dimensions should be roughly 24 to 25 inches deep.

Does refrigerator depth include doors?

The depth of a refrigerator is the measurement from the back of the unit to its front and does not include its door handle. In comparison, a standard or full-size refrigerator has more depth, which makes it stick out farther from the surrounding cabinetry.

What is the depth of a fridge mean?

Counter-depth refrigerators are typically under 30 inches deep. By contrast, most full-size refrigerators are over 30 inches deep, often in the 35- to 36-inch range. So, in many kitchens, traditional refrigerators may stick out half a foot or more from the edge of the kitchen counters.

How deep is a 36 inch refrigerator?

Refrigerator Size: 36 inch. Product Width: 35.8in. Product Depth: 7in. Product Height: 9in.

Do refrigerators have different depths?

If you’ve shopped for appliances lately, chances are you’ve encountered rows of standard-depth refrigerators. These models can range in depth from 30 to 34 inches in depth, compared to the 23 to 27 inches seen with counter-depth refrigerators.

How far is too far for a refrigerator to stick out?

In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.

What refrigerator has the smallest depth?

Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.

What is counter-depth vs standard depth?

A kitchen’s counters are typically between 24 and 25 inches deep, meaning that standard-depth fridges will stick out from the edge of your countertops by 5 to 10 inches.

How deep is a counter-depth fridge?

Most counter-depth fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).

Why are counter depth refrigerators more expensive?

Counter-depth refrigerators have some disadvantages. Counter-depth refrigerators are less popular than standard-depth refrigerators, which can impact the unit-level price. Manufacturers often use thicker, more expensive insulation materials to maximize interior space. This contributes to their higher price.

Article first time published on

How much space do you lose with a counter depth refrigerator?

By combining counter depth styling and 25 cu. ft. of capacity, you no longer have to sacrifice space to take home the style you want. Counter depth styling gives you an extra 5″ of kitchen space, while fitting virtually flush with your current counters and other kitchen fixtures.

What is the standard counter-depth?

While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.

Do they make shallow refrigerators?

Counter depth refrigerators are shallower and wider than standard depth refrigerators, with a depth range of 23 to 27 inches. These units usually have French doors or side-by-side doors, with a smaller freezer compartment on the left and a larger refrigerated section on the right.

Will a 36 inch refrigerator fit in a 36 inch opening?

Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.

How far should a refrigerator be from the back wall?

The refrigerator will need minimum clearances of 2-inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge. Subtract the minimum clearance from initial space measurements to find the maximum dimensions of the refrigerator models you can consider.

Are counter depth refrigerators too small?

Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet. Shallower depth can be limiting.

What is a French door on a refrigerator?

French door refrigerators have one continuous refrigerator space on top accessed by two doors, with a freezer drawer below. … Both models tend to come with a wide range of features such as exterior ice and water dispensers, adjustable shelves and door bins, along with higher-end finish options.

Why are counter-depth fridges not counter-depth?

While the refrigerator box is technically counter depth, all fridges need clearance in back, doors, and handles. … Rather, it is a matter of establishing a common frame of reference for what we mean by counter-depth. In any case, these fridges are shallower than your average fridge, which can run several inches deeper.

Which counter-depth refrigerator is best?

  • Best Budget: Frigidaire Gallery GRSC2352AF.
  • Best Overall: Bosch B36CT80SNS.
  • Most Reliable: GE Profile PYE22KYNFS.
  • Best Innovation: Samsung RF22K9381SR.
  • Best Value Columns: Frigidaire Professional FPRU19F8RF.

How tight can a refrigerator fit?

You should allow for a ½ inch to 1 inch of extra space between the refrigerator and side walls. Allow the same amount of clearance at the top. The refrigerator distance from the back wall should be a bit more, about 1 to 2 inches.

How big of an opening do you need for a 36 inch refrigerator?

To obtain the most integrated look, the cabinet or soffit above the refrigerator should extend out to the same depth as the side panels. The refrigerator opening must have minimum dimensions of 70″ high x 36-1/8″ wide x 24-1/2″ deep as shown at right.

How wide does the opening need to be for a 36 inch refrigerator?

1-8 of 8 Answers. The unit is 35 and 3/4 inches wide. If you’re installing next to a wall, you’ll need a minimum clearance of 3 and 3/4 inches for the door. Sorry, there was a problem.