The FLUSHMATE® system traps air and as it fills with water, it uses the water supply line pressure to compress the trapped air inside. The compressed air is what forces the water into the bowl, so instead of the “pulling” or siphon action of a gravity unit, the pressure-assist unit “pushes” waste out.

How does a FLUSHMATE system work?

The FLUSHMATE® system traps air and as it fills with water, it uses the water supply line pressure to compress the trapped air inside. The compressed air is what forces the water into the bowl, so instead of the “pulling” or siphon action of a gravity unit, the pressure-assist unit “pushes” waste out.

What is a power flush toilet How does it work?

These toilets have a pressure tank inside that works like a big water balloon. Water fills the tank and is held there under pressure. When the flush valve opens, pressure and gravity combine for a power flush toilet.

Does a FLUSHMATE save water?

With millions of Flushmates installed, FLUSHMATE has a proven track record for water saving, reliability, and reduced maintenance. The FLUSHMATE vessel traps air, and as it fills with water, it uses the water supply line pressure to compress the trapped air inside.

How do you adjust the pressure on a FLUSHMATE?

  1. Make sure the water supply valve is turned off and the toilet has been flushed to relieve the pressure.
  2. Remove the Air Inducer Cap. ( …
  3. Remove the Duckbill Valve from the Air Inducer Cap. …
  4. Insert the Duckbill Valve into the Air Inducer housing. ( …
  5. Put the Air Inducer Cap back on, and tighten finger-tight only. (

Are pressure assist toilets better?

A pressure assist toilet is better at flushing down solid waste because of the pressure. Using higher force than conventional toilets, it’s able to push the waste farther. This ensures it doesn’t come back again like with other models of gravity systems.

Can you put a Flushmate on any toilet?

The only way to change the flushing components in a toilet tank with pressure-assisted components is if the toilet is already a pressure-assisted toilet. … According to Flushmate, its pressure-assisted system cannot be retrofitted into a standard, gravity-fed toilet.

What is the difference between flushmate 503 and 504?

Flushmate 503 series means it’s a 1.6 gallons per flush system. And lastly, 504 series means 1.0 GPF.

Where is flushmate located?

The date code range for units included in this recall in MMDDYY format is 070109 (July 1, 2009) through 043011 (April 30, 2011). The date code range for previously recalled systems in MMDDYY format was 101497 (October 14, 1997) through 063009 (June 30, 2009).

Are power flush toilets worth it?

Pros of Pressure-Assisted Toilets Not only can you save a few dollars andsome hard work, but you’ll also reduce the amount of chemicals entering the environment. Since the two-tank system reduces condensation and sweat, it will not contribute to increased humidity in your bathroom.

Article first time published on

How much does a power flush toilet cost?

Pressure-assist toilets are more expensive than regular gravity-flow toilets. While a standard gravity-flow toilet can be purchased for around $120 to $300, a pressure-assist toilet may cost as much as $700.

What is a gravity toilet?

Gravity-assisted toilets function through gravity, as their name implies. When you push the handle, a valve opens within the tank and the water falls from the force of gravity. … Following this gravity-induced waste and water removal, a small gushing pipe refills the tank until a float shuts off the flow of water.

Why is my flushmate keeps running?

A run-on condition may be caused by insufficient water pressure, an improperly adjusted Flush Valve Cartridge, or a clogged inlet screen. … Check water pressure, marginal pressure can cause any of these conditions.

How do you flush a flushmate toilet?

1. Turn off the water supply valve and flush the toilet to relieve the pressure. 2. Place a bucket under the lower Supply Shank (A) and disconnect the water supply line, allowing the water to drain into the bucket.

What is a power assist toilet?

Power-assisted toilets are based on a tank-inside-tank model. As water pumps into the toilet tank from the water supply valve, it creates air-pressure in the tank chamber. This sets the stage for a slightly different type of flush cycle that what occurs in a gravity flow toilet.

What is class 5 Flushing?

The Class Five flushing system is designed for extraordinary bulk flushing performance. Its large flush valve allows rapid release of water combined with a direct fed jet and maximizes water flow. The Ingenium has a quieter, swirling flush designed to minimize noise and clean the bowl.

What is gravity-fed vs pressure assist toilet?

Gravity toilets rely on pushing water downwards through a valve to wash waste through the pipes. In contrast, pressure-assist toilets use a highly pressurized system to rapidly push out air and water into the bowl, washing away the waste.

What is gravity-fed flush?

As you might expect from the name, a gravity-fed (or gravity-flush) toilet uses the force of gravity to move water and waste out of the bowl. This type of toilet is essentially a bare-bones model compared to more intricate and pressure-assisted toilets.

Are comfort height toilets more expensive?

For example, a comfort height, elongated bowl, two-piece Kohler toilet will cost approximately $168. … On the other hand, a standard height, elongated, two-piece American Standard toilet will cost approximately $170. The cost of installation will be the same for a total cost of $348.

Does toto make a pressure assist toilet?

The TOTO CST744SL#01 Drake 2-Piece Ada Toilet features an economical 11.6-gallon flush, an extra-large flush valve, and the pressure-assist delivers 8-psi water pressure to help evacuate waste and prevent clogs. The two-piece design is easy to install and cheaper to maintain should one of the parts fail or crack.

How do you adjust the pressure on a flushmate 503?

The Actuator needs to be set at the proper clearance, 1/8” from either the Flush Rod or push button. To make this adjustment, hold the Actuator while loosening the Phillips setscrew in the center of the Actuator, and rotate the Actuator up (counterclockwise) or down (clockwise) until the proper clearance is obtained.

Are older toilets better?

The biggest difference between older toilets and the models available today is the amount of water they use. Toilets manufactured after 1992 need less than half as much water per use as many older units, while providing a better flush and new convenience features.

Are all toilets water saving?

Water Saving Toilet vs. Regular Toilets. … Water efficient toilets use roughly 1.28 gallons per flush whereas older toilets can use up to 7 gallons of water with every flush. Federal plumbing standards now specify that new toilets can only use up to 1.6 gallons per flush.

How much water did Old toilets use?

Toilets made from the early 1980s to 1992 typically used 3.5 gallons per flush (13.2 liters) or more. Toilets made prior to 1980 typically used 5.0 to 7.0 or high gallons per flush (18.9 lpf to 26.5 lpf). The oldest toilets can use more than 8 gallons per flush (30 lpf).

What is a blowout water closet?

Blowout water closet means a water closet that uses a non-siphonic bowl with an integral flushing rim, a trap at the rear of the bowl, and a visible or concealed jet that operates with a blowout action. with a blowout type bowl.

Do toilets use gravity?

This design is known as a gravity-flush toilet, meaning that it does its work simply by the force of gravity on the water and has no mechanical assistance of any kind. While pressure-assisted toilets are becoming more common, the standard gravity-flush design is still by far the most common in residential homes.