For large scale continuous production, Alocrom 1200 may be applied in a conventional spray washing plant. For brush application use only Brush Alocrom 1200 liquid. This product is supplied as a two pack product.

How do you apply Alocrom 1200?

For large scale continuous production, Alocrom 1200 may be applied in a conventional spray washing plant. For brush application use only Brush Alocrom 1200 liquid. This product is supplied as a two pack product.

What is the difference between alodine and Alocrom?

Alocrom 1200 is marketed under the name Alodine 1200 outside of the UK and drawings calling for Alodine 1200 can be coated with Alocrom 1200 and vice versa. … For example, for maximum electrical conductivity, the coating is colourless to very light yellow, whereas for maximum corrosion protection it is a deeper yellow.

What does Alocrom do?

Alocrom (or Alodine in the US) is a Chromate conversion coating that is applied to aluminium alloys, which provides a level of corrosion protection. Alocrom is also good for paint adhesion and is electrically conductive.

Why do you alodine aluminum?

Chem film or Alodine is a chemical conversion coating that’s mostly used to protect aluminum from corrosion. It’s primarily used to passivate aluminum as it protects this metal and serves as a base for paint coatings. It leaves aluminum unaffected, so it’s easier to put paint over it without changing anything.

What is MIL DTL 5541 Type 2 Class 3?

2 Class 3. Class 3 chemical conversion coatings are intended for use as a corrosion preventive film for electrical and electronic applications where lower resistant contacts, relative to class 1A coatings, and anodic coatings in accordance with MIL-A-8625, are required (see 6.1. 2.1).

Is Alocrom 1200 RoHS compliant?

Alocrom 1200 It is completely free of Chromium (VI), is REACH, RoHS, ELV and WEEE compliant and contains no chromium or other heavy metals. Alocrom 1200 must not be used to treat foodstuff containers as it contains Hexavalent chromium.

What is the difference between alodine and anodize?

The primary difference between Alodine (chem film) and anodizing is that anodizing is an electrolytic process and Alodine (chem film) is not. Alodine (chem film) and anodizing are both processes used in aluminum finishing to improve corrosion resistance. Both transform the outer layer of the surface of the metal.

What is the use of chemical conversion coating?

Chemical Conversion Coating is used to protect enclosures and metal parts from corrosion, and to ensure that reliable electrical connections can be made to aluminum chassis and components. It is also an effective pretreatment for powdercoat.

What is anodising used for?

Anodising is an electrolytic process for producing thick oxide coatings, usually on aluminium and its alloys. The oxide layer is typically 5 to 30µm in thickness and is used to give improved surface resistance to wear and corrosion, or as a decorative layer.

Article first time published on

What is alocrom1200?

ALOCROM 1200 is a rapid non-electrolytic dip process which forms a protective iridescent golden coloured chromate coating on aluminium and its alloys. It gives excellent corrosion resistance to painted and unpainted aluminium surfaces.

What is Iridite?

Iridite is a N.C.P. (non-chrome chemical process) that produces a protective chromate conversion film coating on aluminium and its alloys. … It is often used as a protective coating for abraded anodized surfaces and to provide an electrical contact.

What is Iridite NCP?

Iridite NCP is a passivation process, created by immersing the target metal into an acidic solution. The solution can be adjusted for both heat and acidity and doing so will impart different properties to the aluminium.

How do you apply alodine to aluminum?

APPLICATION OF ALODINE Apply the diluted Alodine liberally to the aluminium surface. Treat only as large an area at one time as can be conveniently handled with the equipment being used (approximately 6-10 square feet of surface.)

Can you spray alodine?

Alodine can be sprayed, brushed, or sponged onto large surfaces. The surface must remain wet for several minutes or until a light to dark golden brown develops. Alodine should not be allowed to dry on the surface because of the salts it contains.

What is alodine used for?

Chemfilm, sometimes called alochrome, aluminum chromate, Alodine or Iridite, is a chemical conversion coating that is used to passivate aluminum. It protects aluminum substrates from corrosion and serves as a base for organic coatings while leaving dimensions unchanged.

Is anodize RoHS compliant?

The following treatments are RoHS compliant: Sulphuric anodising, except when dichromate sealed.

Is passivated stainless steel RoHS compliant?

Because passivation is fundamentally a cleaning treatment (which removes embedded particles of iron from the surface of the part), none of the chemicals in the bath bond to the part. Further, all bath chemistry is rinsed completely away from the part. Theoretically, therefore, all passivate is RoHS compliant.

Is zinc plating RoHS compliant?

The substance of concern with regard to chromate conversion coatings on zinc plating and RoHS compliance is hexavalent chromium. … Therefore all -ZI product plated after June 2002 is RoHS compliant. Also, we began using trivalent chromate in our optional zinc and yellow (suffix -ZC) plating on March 1, 2006.

What color is MIL DTL 5541 3?

Class 3- (Clear or Yellow) For protection against corrosion where low electrical resistance is required. Chromate Classes 1 • Class 1A- (Yellow) For maximum protection against corrosion, painted or unpainted. Class 3- (Clear or Yellow) For protection against corrosion where low electrical resistance is required.

What color is MIL DTL 5541 Type 2 Class 3?

This film typically appears to be gold or brown in color, but in some cases may be optionally specified as having no color (Having no color is described as “clear”). Type II: Addresses compositions containing no hexavalent chromium. This film typically appears to have no color (Having no color is described as “clear”).

Is Mil C 5541 still active?

The previous version (MIL-C-5541) is obsolete and only allowed compositions with hexavalent chromate Cr(VI). The most current version (revision “F”) covers conversion coatings that are environmentally friendly and compliant with Reduction of Hazardous Materials (RoHS) initiatives.

What is a conversion coating process?

Conversion coatings are formed by immersing a metallic item into a chemical solution, with or without the application of electric current to the item. The reaction between the material and chemical solution results in the growth of a coating layer from the substrate surface.

What is the difference between Iridite and alodine?

A. Iridite is a trade name for a whole family of chromate conversion coatings. Alodine 1200S is the trade name for aluminum chromate that meets MIL-C-5541. Iridite 14-2 is the particular trade name for a product that is chromate conversion for aluminum.

Does alodine prevent corrosion?

Alodine is a chemical treatment of aluminum to prevent corrosion, it is electrically conductive and can be used as a primer for layers of paint. It does not add weight or changes dimensions of the part that is being treated, where as paint does.

Can alodine be used on steel?

Chromate conversion coating or alodine coating is a type of conversion coating used to passivate steel, aluminium, zinc, cadmium, copper, silver, titanium, magnesium, and tin alloys.

What is Type 2 anodize?

Type II anodizing is a process done by placing the aluminum in a sulfuric bath which builds up the aluminum oxide on the surface as well as into the aluminum material too, about half and half. … Type II anodizing is the common referral derived from military standard spec Mil-A-8625.

Does anodizing wear off?

Anodize does not come off. Anodize is fairly permanent because it actually “grows” out of the base aluminum material. However, it can be removed with an acid wash, and it can indeed be worn off.

Does anodising add thickness?

The anodizing process makes the oxidized surface much thicker, up to several thousandths of an inch thick. The hardness of the anodized aluminum oxide coating rivals that of a diamond, enhancing the abrasion resistance of the aluminum. … Anodizing typically ranges up to 5 mils thickness.

How long does anodized aluminum last?

Anodizing provides a thin aluminum oxide layer, which will deteriorate over time. Depending on the thickness and quality of the anodization, the surface should last 10-20 years.

What is gold Iridite?

Commonly known as Yellow and Clear Iridite or Alodine finishes, chemical conversion coatings are used primarily for paint adhesion on aluminum. Although the iridescent gold finish is very attractive, it is not as durable as an anodized finish. Two classes of coatings are available under Mil-C-5541 and Mil-C-81706.