Turn off the water to the washing machine supply lines. Close the shut-off valves, disconnect the washing machine hoses, then open the valves again to drain the lines, instructs This Old House. Pull the drain hose out of the standpipe and pull the washing machine away from the wall.

How hard is it to move laundry hookups?

Relocating your washing machine gets trickier when plumbing costs are involved. And one major plumbing cost to relocate your washer and dryer is building a drain line. Depending on how close it is to the existing plumbing, that price could be anywhere between $360 and $1,840.

How do you move water lines in a laundry room?

  1. COUNTERTOP DREAMS. We’ve wanted to put countertops across the washer and dryer for years. …
  2. TAKE A PHOTO OF YOUR SETUP. Step one is to buy a new outlet box. …
  3. GETTING STARTED. Turn off the water main. …
  4. TRACE AWAY. …
  5. GET CUTTING. …
  6. BE SURE IT’S A GOOD FIT. …
  7. CUT MORE DRYWALL. …
  8. TIME TO PATCH.

Can a washing machine be plumbed anywhere?

“In theory, you can put a washing machine anywhere,” architect Brian O’Tuama says. “We’ve never had significant issues locating a washing machine anywhere, including a cellar.” “A deep closet will suffice,” Eva says, giving the example of the room pictured.

Can you relocate a laundry room?

You can’t move a washer and dryer just anywhere without moving a lot of wires and pipes. On top of that planning, you also need to obey some physical laws (otherwise a little pocket dimension would be the ticket).

How do you install laundry hookups?

  1. Find the Right Location. Installing a washing machine outlet box begins by finding a suitable location. …
  2. Prepare the Location. …
  3. Place the Outlet Box. …
  4. Connect the Water Lines. …
  5. Connect the Washer Lines. …
  6. Cover Your Outlet Box.

How much does it cost to install plumbing for a washing machine?

How much does it cost to add washer and dryer hookups? On average, the price to add hookups runs between $350 and $600, but it could cost up to $2,000 if a lot of plumbing and electrical work is needed.

Can a washer and sink share a drain?

The plumbing code requires one on every drain and has established rules governing its size and distance from the fixture trap. … If you’re joining a washing machine and kitchen sink on the same drain, you may be able to vent them both with a single vent if they are close enough together.

How do you position a washing machine drain hose?

In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.

How do I extend the water line to my washing machine?
  1. Unhook the existing drain hose from the standpipe, either by disengaging the hose from the curved hose form or pulling out the curved portion of the pipe. …
  2. Measure the distance to the new washer location and buy a drain hose extension that is long enough to reach.
Article first time published on

How much does it cost to move a laundry room upstairs?

If you want to move your laundry room upstairs, expect to spend as much as $14,825 depending on the room size and materials. Your plumber will need to extend the copper pipes, install faucets, and add a longer drain line to hook up your appliances.

Can I move my washer and dryer to the garage?

Installing your washing machine in the garage is perfectly appropriate because of its concrete floors and is suited for appliances such as washers and dryers. It also optimizes space by making use of the available space in your garage.

Does washer drain need a trap?

When hooking up a new washing machine, some people look for a convenient drain line and simply install a pipe that extends to the washer. … The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.

What is a washer box in plumbing?

Home / Residential Plumbing / Laundry Room Plumbing / Washing Machine Box. Laundry boxes are recessed into the wall behind the washing machine and provide water supply line connections and a wastewater drain. These outlets improve the look of your laundry area by hiding pipes and tidying hoses.

How do I add a laundry room to my house?

The key to making a small laundry room layout work is to think vertical. Instead of trying to utilize space horizontally and trying to make counter space, build your storage upwards. If you want to include a drying rack consider hanging it from the ceiling rather than building racks on the walls of your laundry area.

Where does washing machine drain to?

Wastewater from your washing machine and dishwasher may either go to your septic tank and/or cesspool or to a separate disposal system called a dry well. This wastewater can be problematic due to its high concentrations of soaps and detergents, grease and paper.

How far away can a washing machine be from the drain?

The drain must be at least 30″ from the floor and less than 8 feet high in order to function properly.

How do you plumb a sink and washer drain?

  1. Insert the drain hose from the washing machine into the top of the sewer pipe. …
  2. Fit together the p-trap and drainpipe and place them into position between the tailpiece and the sewer pipe. …
  3. Connect the drainpipe for the sink to the tee inlet.

Why does my sink fill with water when my washing machine drains?

Sometimes, water might back up in the kitchen sink while you’re doing a load of laundry, or your bathtub will fill with water. Either case means that your main drain line is clogged. You need to call a professional to clear the drain for you. … You will need to get your drains cleaned professionally for that.

Is it OK to extend a washing machine drain hose?

“You can use extended hoses. Best practise is to actually move the pipes nearer to the machine though.”

How far can I extend my washing machine drain hose?

The answer to this question is complicated by the fact that it is much harder to pump water vertically than horizontally. Washing machine manuals typically specify a minimum height of 39” for the entry of the drain hose into the standpipe or faucet box, and a maximum height of 96” (8 feet).

How hard is it to reroute plumbing?

Relocating plumbing can be a time consuming and hard work. That’s why you should only do it if you have prepared beforehand and if you have confidence in the professionals you chose to do the job. But take comfort in the fact that once it’s done, you won’t have to think about it for a long time.

How hard is it to move water pipes?

Moving kitchen plumbing is very difficult if your house is on a slab foundation. Water pipes can often be rerouted through walls or ceilings, especially if you use flexible PEX pipe. However, because the drain needs to have pitch and be lower than the fixture, it requires cutting and jack hammering through the slab.

How do I move shower plumbing?

  1. Turn off the watter supply to the house, then open all faucets to drain as much water out of the system as possible.
  2. Remove the tubing straps securing the shower valve to the framing.
  3. Cut the all the pipes coming to and from the existing shower valve.

How do you hide plumbing in a laundry room?

  1. Go Industrial.
  2. Cover them with design tape.
  3. Add wood pipe wrapping.
  4. Add a bit of foliage.
  5. Cover them with bins.
  6. Build a false wall.
  7. Replace them with better-looking pipes.
  8. Add wraparound lights.

How do I get my washer downstairs?

  1. With a friend, shimmy the washer or dryer away from the wall, and tip the appliance backward. …
  2. Place your foot behind the dolly’s wheel and tip the dolly back as your helper supports the weight. …
  3. To move the appliance down stairs, it is best to go bottom first.