When hooking up a new washing machine, some people look for a convenient drain line and simply install a pipe that extends to the washer. … The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.

What are the requirements for a washing machine drain?

Drain and Trap Requirements A 2-inch drain pipe is required for all washing machines. The former requirement of 1 1/2-inch pipe is not enough to handle the fast drainage of modern washers. As with all plumbing fixtures and appliances, a washing machine drain pipe must also contain a P-trap.

Does every drain need a trap?

There are traps in every drain because any connection that leads to the drain system is also a possible outlet for sewer gas. Even your toilet has an internal trap shape to its porcelain configuration that serves exactly the same function.

Do all washing machines have a trap?

Most styles of washing machines do not have an interior lint trap, and for the ones that do, won’t even come close to snagging those tiny fibers that can cause environmental issues.

Can a laundry sink drain be installed without a trap under it?

A laundry sink (also called a laundry tray or tub) can be connected to a washing machine standpipe without a P-trap if the sink drain is within 30-inches of the standpipe. Also, the top of the standpipe must be above the flood rim of the sink and rise at least 30” above the trap weir of the standpipe.

What is a washing machine trap?

Washing machine traps are traps with an appliance connector required for the connection of domestic appliances waste pipes. With the range offering well recognised types of connections, washing machine waste traps are perfect for either replacement of the same type or when accommodating the waste of a new appliance.

How high should a drain be for a washing machine?

In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.

Does a top load washer have a filter?

“Top loaders tend to have filters on the valves,” said Amber Peabody, Service Manager at Dunnett Inc. The valve filters sift the water going in and out of the pump and hoses. If you do happen to have a removable filter, consult your owner’s manual on how to properly remove it.

Does my LG washing machine have a filter?

Your LG Front load washing machine is equipped with a drain pump filter that makes lost button or loose change a thing of the past.

Does a tub drain need a trap?

Does a bathtub need a P-Trap? Yes, you should always install a P-Trap as part of the plumbing of a bathtub or any other wastewater drain system. Failure to include a P-Trap could result in foul smells, harmful gases, and small animals entering through your tub’s drain.

Article first time published on

What happens if there is no P-trap?

Shower lines can be damaged if p-traps are not installed. They have the potential to bring harmful sewer odors into your home. … It permits sewer gases to back up into your home through the drain. Since there are no p-traps in the shower, the dirt and debris or other solids won’t be caught.

How do you tell if a drain has a trap?

Pour some water down the drain –> disconnect the drain –> take a flashlight and look into the drain where it enters the floor –> if the drain pipe has water in it then it likely has a trap.

Can a washer and sink share a drain?

The plumbing code requires one on every drain and has established rules governing its size and distance from the fixture trap. … If you’re joining a washing machine and kitchen sink on the same drain, you may be able to vent them both with a single vent if they are close enough together.

Can you drain a washing machine outside?

And unless you’re washing poopy diapers, laundry is graywater, so it’s not a health hazard. You could direct the water to mulched trees, or a gravel-filled trench you could dig. But don’t just dump it onto the grass. Anyone who fertilizes their lawn or shrubs is probably adding phosphates to their landscape.

Can a washing machine drain upwards?

The washing machine discharge maximum height is 96″ for top and front loading machines. However, installing the extended height above the washing machine could cause that extended height of water to drain back into washing machine.

How do you slow down a washing machine drain?

A solution to your problem is to put a restriction in your washing machine discharge hose to slow down its flow to what your drain can handle. Just don’t slow it down to the point that your washing machine timer times out and goes on to the next step in the cycle!

How long should a washer drain pipe be?

For a top load washing machine, 5” of the hose will go inside the drain pipe. And for front load machines, the length should be 7”. The universal diameter for the drain hose is 1-1 ¼ ”. The height of the standpipe connected to the hose should be between 39” to 69”.

What size is a washing machine trap?

The required size for your washing machine drain pipe is two inches. The drain pipe must also have a P-trap that measures between six and 18 inches above the floor, and then a standpipe that measures between 18 and 30 inches above that.

What is a drain trap?

The purpose of a drain trap is to hold a small amount of water to prevent sewer gases from escaping through the sink or shower drain. The toilet has a built-in trap that keeps the bowl partially filled at all times.

Does a washing machine drain have ap trap?

When hooking up a new washing machine, some people look for a convenient drain line and simply install a pipe that extends to the washer. … The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.

Do all front load washers have a filter?

Clear Drain Pump Filter: Every front-loading machine will have a drain pump filter, typically located near the bottom of the machine. Consult manufacturer instructions for the location, as well as how to access the filter door. Clear this filter after every few washings.

Why does my washing machine drain stink?

The most likely is bacteria growing in your washer because of built-up dirt, mildew and mold, lint, and/or soap. If you don’t regularly clean your washing machine, these things build up on, under, or inside the rubber seal and in the crevices of the drum.

Does my LG Top Loader have a filter?

High-Efficiency Washers Don’t Have a Lint Filter If you have a newer high-efficiency (HE) washer—whether front- or top-loading—the machine doesn’t have a lint trap. Instead, it relies on a self-cleaning pump filter to remove lint from the wash.

Do all washing machines have filters?

Still no luck? It’s possible your washing machine does not have a filter at all. Most newer, high-efficiency washers rely on a filter in the pump that self-cleans, meaning that there’s no need for maintenance on your end.

Where is the filter on a top loader washing machine?

  1. There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator. …
  2. During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.
  3. These filters should never require cleaning or replacement.

Where is the filter on a Whirlpool top loader washing machine?

Usually, it will be on the bottom right of the washing machine, making access rather easy. Of course, your model may be different so you may need to consult the user’s manual or give your washer a quick look over to find it.

How far can P-trap be from tub drain?

Maximum Distance According to the International Residential Code, the maximum vertical distance between the sink drain and the entrance to the p-trap is 24 inches.

Is there a trap in a shower drain?

The shower drainage features a piping that has a trap as part of its key components. The trap in the shower drain works like the one beneath the kitchen sink. While the sink trap is P-shaped, you may find some S-shaped shower traps.

Where is the trap on a bathtub drain?

A bathtub trap begins at the end of the tub drain assembly, where it is glued onto a fitting screwed to the drain outlet. The other end is glued to a length of horizontal pipe. It ties into the waste stack that empties into the sewer.

Is P-trap necessary?

A P-trap is required to be installed in most sink, shower, and bathtub drain lines by law. The reason P-traps are so essential is because they retain clean water in the drain line. This water seal stops horrible-smelling sewer gas from coming back up the drain line and into your home.

Do you have to have P-trap?

Plumbing codes require a P-trap be installed anywhere there is an open drain line that expels wastewater into a drain waste-vent system. The P-trap traps solids that can clog the drain or sewer line.